ÜRÜNLER

Salmarcon ürün portföyü özenle seçilmiş ve müşterilerimizin ihtiyaçlarına göre oluşturulmuş ürün gamı ve sızdırmazlık çözümleri üzerine inşa edilmiştir. Yüksek kalitede conta çeşitleri ve bağlantı elemanları (civata, saplama, somun, pul) gibi endüstriyel sızdırmazlık ve bağlantı ürünleri üretmek ve tedarik etmekte olan Türkiye’nin önde gelen uzman firmasıdır.

Ürün yelpazemiz, müşterilerimizin tedarik zincirlerini daha basit ve hızlı tepki veren bir destek sunmaktadır.
İhtiyacınız olan tüm sızdırmazlık çözümlerini sunmaktayız:

›› Fiber, Teflon, Grafit, Mika ve Kauçuk Esaslı Soft Sızdırmazlık Ürünleri,
›› Spiral Sarımlı, Kammprofile, Corrugated, Metal Ceketli ve Metal Takviyeli Kauçuk vb. Yarı Metalik Contalar,
›› Ring Tipi (RTJ), Welding Ring, Norsok Tipi (IX) Ring, Lens Ring, Diyafram ve Boru & Flanş vb. Metalik Ürünler,
›› Saplama, Civata , Somun ve Pul vb. Bağlantı Elemanları,
›› İzolasyon Kitleri,
›› Seviye Göstergeleri ve Enstrümanlar,
›› Conta Kesme Makinası,
›› Ve Daha Fazlası

Sertifikalı ve global olarak güvenilir ürünler.

Salmarcon olarak odak noktamız her zaman için iş güvenliği kapsamında tesis ve personel güvenliğini sağlamaktır. Çalışma şartları fark etmeksizin, sorunsuz performans sağlayan yüksek kaliteli mühendislik çözümleri sunmak başlıca hedeflerimiz arasında yer almaktadır.

YUMUŞAK SIZDIRMAZLIK MALZEMELERİ

POWER PLANTS

POTABLE WATER

CHEMICAL INDUSTRY

HEAVY INDUSTRY

ASBESTOS FREE

EASY TO CUT & FIT

NON TOXIC

ANTI-STICK MATERIAL

FİBER İÇERİKLİ CONTALAR

Fiber içerikli contalar oldukça yüksek performans ve kaliteye sahip, petro-kimya, enerji, gıda vb. endüstrilerde bir çok genel kullanıma uygun ürünlerdir. BAM ,DVGW, DNV GL,WRAS, TA-Luft ve Fire-Safe gibi çeşitli sertifikasyonlara sahiptir.

Tipik uygulama alanları, mevcut boyutlar, kalınlıklar, teknik özellikler ve kalite sertifikaları hakkında daha fazla bilgi için lütfen Soft Sızdırmazlık Kataloğumuzu indirin.

KLINGERSIL c-4430 plus

KLINGER TOP-GRAPH 2000

KLINGER COMPENSIL

Universal high-pressure gasket for a wide range of applications.
KLINGERSIL® C-4300 is a universal high-pressure gasket and offers more safety for a wide range of suitable applications.

Basis

Aramid fibers bonded with NBR.

Areas of application

Resistant to hot water, steam, oils, hydrocarbons and many other chemicals.

Key features

» General purpose gasket material
» Dimensionally stable
» Consistent material composition

Benefits

» Excellent Price/Performance ratio
» Suitable for many different media

Certificates & Approvals

• DIN-DVGW
• DIN-DVGW W 270
• Elastomer-Guidline
• DNV GL
• SVGW approval

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	14
Recovery ASTM F 36 J		%	50
Stress relaxation DIN 52913	50 MPa, 16 h/175°C 50 MPa, 16 h/300°C	MPa MPa	32 20
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	23
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C	% %	10 22
Tightness	DIN 28090-2	mg/s x m	0.03
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	5 10
Density		g/cm3	1.6
Average surface resistance	ρO	Ω	2.2x10E12
Average specific volume resistance	ρD	Ω cm	1.2x10E12
Average dielectric strength	Ed	kV/mm	10
Average power factor	50 Hz	tan δ	0.082
Average dielectric coefficient	50 Hz	εr	7.4
Thermal conductivity	λ	W/mK	0.39
Classification acc. to BS 7531:2006	Grade Y

Universal high-pressure gasket for a wide range of applications.
KLINGERSIL® C-4324 is a universal high-pressure gasket, suitable for a wide range of applications.

Basis

Combination of synthetic high performance fibers, bonded with NBR.

Areas of application

This gasket material is suitable for the use in liquids and steam at lower pressure and temperature. Resistant to water, oils, hydrocarbons and many other chemicals.

Key features

» General purpose gasket material
» Dimensionally stable
» Consistent material composition

Benefits

» Excellent Price/Performance ratio
» Suitable for many different media

Certificates & Approvals

• DIN-DVGW
• WRAS Approval
• Elastomer-Guidline
• DNV GL
• SVGW approval

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	10
Recovery ASTM F 36 J		%	55
Stress relaxation DIN 52913	50 MPa, 16 h/175°C 50 MPa, 16 h/300°C	MPa MPa	31 20
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	23
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C	% %	10 25
Tightness	DIN 28090-2	mg/s x m	0.03
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	5 10
Density		g/cm3	1.85
Average surface resistance	ρO	Ω	1.04x10E13
Average specific volume resistance	ρD	Ω cm	4.3x10E11
Average dielectric strength	Ed	kV/mm	12
Average power factor	50 Hz	tan δ	0.109
Average dielectric coefficient	50 Hz	εr	9
Thermal conductivity	λ	W/mK	0.50
Classification acc. to BS 7531:2006	Grade Y

Higher safety for universal applications.
KLINGERSIL® C-4400 is a universal material for safe and reliable sealing. It consists of a unique matrix, which offers an excellent combination of different properties.

Basis

Aramid fibers, bonded with NBR.

Areas of application

Resistant to oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

Key features

» Universal high pressure gasket material
» Dimensionally stable
» Consistent material composition

Benefits

» Excellent price/Performance ratio
» Suitable for many different media
» Very good resistance to refrigerants

Certificates & Approvals

• BAM tested
• DIN-DVGW
• DIN-DVGW W 270
• DVGW VP 401
• Elastomer-Guideline
• ÖVGW Reg.No. G 1.912
• DNV GL
• TA-Luft (Clean air)
• Fire-Safe acc. to DIN EN ISO 10497

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	11
Recovery ASTM F 36 J		%	55
Stress relaxation DIN 52913	50 MPa, 16 h/175°C 50 MPa, 16 h/300°C	MPa MPa	37 25
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	25
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C	% %	10 20
Tightness	DIN 28090-2	mg/s x m	0.02
Specific leakrate λ	VDI 2440	mbar x l/s x m	1.64E-08
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	3 5
Density		g/cm3	1.6
Average surface resistance	ρO	Ω	1.4x10E12
Average specific volume resistance	ρD	Ω cm	1.2x10E12
Average dielectric strength	Ed	kV/mm	21.6
Average power factor	50 Hz	tan δ	0.131
Average dielectric coefficient	50 Hz	εr	9.2
Thermal conductivity	λ	W/mK	0.42
Classification acc. to BS 7531:2006	Grade Y

Universal high-pressure gasket for industrial applications.
KLINGERSIL® C-4408 is suitable for high stress due to wire reinforcement. It is a universal high-pressure gasket for the use in a wide range of industrial applications.

Basis

Aramid fibers bonded with NBR.

Areas of application

Resistant to oils, water, steam, gases, fuels, alcohols, hydrocarbons, lubricants and refrigerants.

Key features

» Wire reinforcement
» Improved stress relaxation

Benefits

» Suitable for higher pressures
» Higher resistance against blow-outs
» More safety at high internal pressures

Certificates & Approvals

• DNV GL

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	8
Recovery ASTM F 36 J		%	50
Stress relaxation DIN 52913	50 MPa, 16 h/300°C	MPa	28
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	28
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C	% %	10 18
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	5 5
Density		g/cm3	1.9
Classification acc. to BS 7531:2006	Grade Y

Outstanding stress relaxation and resistance to hot water and steam. KLINGERSIL® C-4430 offers outstanding stress retention and resistance to hot water and steam.

Basis

Optimum combination of synthetic fibers, bonded with NBR.

Areas of application

Resistant to water and steam at higher temperatures as well as to oils, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

Key features

» Optimum combination of synthetic and glass fibres
» Outstanding stress relaxation
» Dimensionally stable

Benefits

» Suitable for high temperature steam and water
» Better resistance against hydrocarbons
» Suitable for many different media

Certificates & Approvals

• BAM-tested
• DIN-DVGW
• DVGW VP 401
• DIN-DVGW W 270
• Elastomer-Guidline
• WRAS approval
• DNV GL
• TA-Luft (Clean air)
• Fire-Safe acc. to DIN EN ISO 10497
• Fire-Safe acc. to ISO 19921

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	9
Recovery ASTM F 36 J		%	55
Stress relaxation DIN 52913	50 MPa, 16 h/175°C 50 MPa, 16 h/300°C	MPa MPa	39 35
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	31
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C	% %	8 11
Tightness	DIN 28090-2	mg/s x m	0.05
Specific leakrate λ	VDI 2440	mbar x l/s x m	2.13E-05
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	3 5
Density		g/cm3	1.8
Average surface resistance	ρO	Ω	4.1x10E13
Average specific volume resistance	ρD	Ω cm	4.5x10E12
Average dielectric strength	Ed	kV/mm	21.3
Average power factor	50 Hz	tan δ	0.03
Average dielectric coefficient	50 Hz	εr	6.7
Thermal conductivity	λ	W/mK	0.38
Classification acc. to BS 7531:2006	Grade AX

Industry leading stress relaxation and outstanding resistance to hot water and steam.
KLINGERSIL® C-4430plus is a premium-quality, high-pressure gasket with outstanding stress relaxation and outstanding resistance to hot water and steam.

Basis

Optimum combination of synthetic fibers, bonded with NBR.

Areas of application

Suitable for use with water and steam at higher temperatures and resistant to oils, hydrocarbons, gases, salt solutions, fuels, alcohols, lubricants, refrigerants, as well as to moderate organic and inorganic acids.

Key features

» Utilization of KLINGER®Quantum production technology
» Optimum combination of synthetic and glass fibres
» Outstanding stress relaxation

Benefits

» More safety
» Better lifetime
» Better high temperature tightness
» Improved thermal stability

Certificates & Approvals

• BAM tested
• DIN-DVGW
• DIN-DVGW W 270
• Elastomer-Guideline
• WRAS approval
• TA-Luft (Clean air)
• Fire-Safe acc. to DIN EN ISO 10497

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	9
Recovery ASTM F 36 J		%	55
Stress relaxation DIN 52913	50 MPa, 16 h/175°C 50 MPa, 16 h/300°C	MPa MPa	39 35
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	31
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C thickness decrease at 400°C	% %	8 11 14
Tightness	DIN 28090-2	mg/s x m	0.05
Specific leakrate λ	VDI 2440	mbar x l/s x m	2.9E-06
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	3 5
Density		g/cm3	1.8
Average surface resistance	ρO	Ω	4.1x10E13
Average specific volume resistance	ρD	Ω cm	4.5x10E12
Average dielectric strength	Ed	kV/mm	21.3
Average power factor	50 Hz	tan δ	0.03
Average dielectric coefficient	50 Hz	εr	6.7
Thermal conductivity	λ	W/mK	0.38
Classification acc. to BS 7531:2006	Grade AX

Superior performance gasket especially for the chemical industry. KLINGERSIL® C-4500 is a premium quality high-pressure gasket especially suitable for use with high temperature alkaline media and superheated steam. It is a superior performance product designed for the use in the chemical industry.

Basis

Carbon fibers and special heat-resistant additives, bonded with NBR.

Areas of application

Suitable for use with alkaline media and steam at higher temperatures as well as to oils, gases, salt solutions, fuels, alcohols, organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

Key features

» Utilization of carbon fibres
» Heat resistant additives
» Resistant to creep and cold flow
» Dimensionally stable

Benefits

» Suitable for high temperature alkaline media
» Suitable for superheated steam

Certificates & Approvals

• BAM-tested
• DIN-DVGW
• DIN-DVGW W 270
• Elastomer-Guideline
• ÖVGW Reg.No. G 2.143
• DNV GL
• TA-Luft (Clean air)
• Fire-Safe acc. to DIN EN ISO 10497

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	11
Recovery ASTM F 36 J		%	60
Stress relaxation DIN 52913	50 MPa, 16 h/175°C 50 MPa, 16 h/300°C	MPa MPa	38 30
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	30
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C	% %	10 15
Tightness	DIN 28090-2	mg/s x m	0.05
Specific leakrate λ	VDI 2440	mbar x l/s x m	4.94E-06
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	3 5
Density		g/cm3	1.6
Average surface resistance	ρO	Ω	8.0x10E04
Thermal conductivity	λ	W/mK	0.43
Classification acc. to BS 7531:2006	Grade AX

Special high-pressure gasket for highest thermal and mechanical stresses.
KLINGERSIL® C-4509 is a special high-pressure gasket for highest thermal and mechanical stresses. Due to the expanded metal reinforcement it offers a high stress capability and is suitable for high bolt loads. The basic material KLINGERSIL® C-4500 is a Fire Safe grade.

Basis

Carbon fibers and special high temperature resistant additives, bonded with NBR.

Areas of application

Made from high-tech materials it offers excellent service in many sectors of the chemical industry. Main fields of application: alkaline media and steam.

Key features

» Utilization of carbon fibres
» Expanded metal reinforcement
» Improved stress relaxation

Benefits

» Suitable for high-pressure applications
» Higher resistance against blow-outs
» More safety at high internal pressures

Certificates & Approvals

• DNV GL

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	10
Recovery ASTM F 36 J		%	62
Stress relaxation DIN 52913	50 MPa, 16 h/300°C	MPa	43
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	41
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C	% %	8 6
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	3 5
Density		g/cm3	2.0

Swelling in oil and fuels KLINGERSIL® C-6327 offers an excellent conformity with flanges at low surface loads.

Basis

Aramid fibres and inorganic fibres bonded with SBR.

Areas of application

Body gaskets for liquids and steam at lower pressures and temperatures and low bolt loads, e.g. transformer gaskets.

Key features

» Use of SBR rubber as binder
» High compressibility

Benefits

» Controlled swelling in oils and fuels
» Provides very good adaptability to any sealing surface
» Conforms easily
» Excellent sealing at low stress
» Improved radiation resistance

Certificates & Approvals

• German Lloyd

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	25
Recovery ASTM F 36 J		%	45
Stress relaxation DIN 52913	50 MPa, 16 h/175°C	MPa MPa	25
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C	% %	20 32
Tightness	DIN 28090-2	mg/s x m	0.02
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	45 30
Density		g/cm3	1.7
Average surface resistance	ρO	Ω	4.5x10E14
Average specific volume resistance	ρD	Ω cm	6.8x10E13
Average dielectric strength	Ed	kV/mm	13
Average power factor	50 Hz	tan δ	0.049
Average dielectric coefficient	50 Hz	εr	5.8

More safety for the use with high concentrated acids.
KLINGERSIL® C-8200 is a premium high-pressure gasket which offers more safety for the use with high concentrated acids.

Basis

Glass fibers, bonded with special acid-resistant elastomers.

Areas of application

This material is resistant to a wide variety of media and especially to acids.

Key features

» Special acid-resistant elastomer as binder
» Flame retardant binder

Benefits

» Resistant to a variety of media especially acids
» Improved ozone resistance

Certificates & Approvals

• DNV GL
• TA-Luft (Clean air)

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	9
Recovery ASTM F 36 J		%	55
KLINGER cold/hot compression 25 MPa	thickness decrease at 23°C thickness decrease at 200°C	% %	7 15
Specific leakrate λ	VDI 2440	mbar x l/s x m	9.17E-09
Density		g/cm3	1.7
ACID TESTS
Thickness increase after fluid immersion ASTM F 146	HNO3, 96%, 18 h / 23 °C H2SO4, 96%, 18 h / 23 °C H2SO4, 65%, 48 h / 23 °C oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% % % % %	unsuitable 15 8 5 10
Average surface resistance	ρO	Ω	5.8x10E11
Average specific volume resistance	ρD	Ω cm	4.1x10E12
Average dielectric strength	Ed	kV/mm	17.0
Average power factor	50 Hz	tan δ	0.228
Average dielectric coefficient	50 Hz	εr	9.4

Unique gasket material with highest flexibility at high temperatures.
KLINGER®Quantum is a unique gasket material with highest flexibility at high temperatures.

Basis

High-quality fiber and filler compound bonded in a high temperature resistant HNBR-Matrix.

Areas of application

This material is suitable for the use in oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

Key features

» Unique HNBR matrix
» Special curing technology
» Resistant to creep and cold flow
» Dimensionally stable

Benefits

» Superior long-term flexibility at higher temperatures
» Outstanding temperature resistance
» FDA conformity

Certificates & Approvals

• BAM-tested
• DIN-DVGW
• TA-Luft (Clean air)
• Fire-Safe acc. to DIN EN ISO 10497
• FDA conformity

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	10
Recovery ASTM F 36 J		%	50
Stress relaxation DIN 52913	50 MPa, 16 h/175°C 50 MPa, 16 h/300°C	MPa MPa	32 30
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	29
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C thickness decrease at 400°C	% %	10 14 20
Tightness	DIN 28090-2	mg/s x m	0.02
Specific leakrate λ	VDI 2440	mbar x l/s x m	4.4E-08
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	3 5
Density		g/cm3	1.7
Average surface resistance	ρO	Ω	7.7x10E12
Average specific volume resistance	ρD	Ω cm	4.7x10E12
Average dielectric strength	Ed	kV/mm	18.5
Average power factor	50 Hz	tan δ	0.064
Average dielectric coefficient	50 Hz	εr	6.8
Thermal conductivity	λ	W/mK	0.44
Classification acc. to BS 7531:2006	Grade AX

Special multi-layer gasket material with extended service life.
KLINGER®top-sil ML1 is a special multi-layer gasket material with extended service life and improved flexibility at higher temperatures.

Basis

Revolutionary combination of synthetic fibers and different elastomers, bonded in a multi-layer structure.

Areas of application

This material is suitable for use with oils, water, steam, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants.

Key features

» Unique multi-layer structure
» Utilization of HNBR and NBR rubber
» Resistant to creep and cold flow
» Dimensionally stable

Benefits

» Extended service life time
» Improved flexibility at higher temperatures

Certificates & Approvals

• BAM-tested
• DIN-DVGW
• TA-Luft (Clean air)
• Fire-Safe acc. to DIN EN ISO 10497

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	9
Recovery ASTM F 36 J		%	50
Stress relaxation DIN 52913	50 MPa, 16 h/175°C 50 MPa, 16 h/300°C	MPa MPa	34 28
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	29
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C	% %	8 15
Tightness	DIN 28090-2	mg/s x m	0.05
Specific leakrate λ	VDI 2440	mbar x l/s x m	3.51E-06
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	4 8
Density		g/cm3	1.7
Average surface resistance	ρO	Ω	9.3x10E12
Average specific volume resistance	ρD	Ω cm	3.8x10E12
Average dielectric strength	Ed	kV/mm	18.8
Average power factor	50 Hz	tan δ	0.048
Average dielectric coefficient	50 Hz	εr	7.3
Thermal conductivity	λ	W/mK	0.36
Classification acc. to BS 7531:2006	Grade AX

Combines the advantages of fiber-reinforced gaskets and flexible graphite.
KLINGER®top-graph 2000 combines the advantages of fiber-reinforced gaskets with the key features of flexible graphite.

Basis

Graphite and synthetic fibers bonded with NBR.

Areas of application

Thanks to its high degree of inherent stability this material offers reliability in handling. Due to the high load bearing capacity and the low embrittlement, KLINGER®top-graph 2000 is ideal for the use with steam and other demanding applications.

Key features

» Utilization of graphite as filler
» High Level of load bearing capacity

Benefits

» Improved flexibility
» Resists high surface pressure also at elevated temperatures

Certificates & Approvals

• BAM-tested
• DIN-DVGW
• DNV GL
• TA-Luft (Clean air)

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	10
Recovery ASTM F 36 J		%	60
Stress relaxation DIN 52913	50 MPa, 16 h/300°C	MPa	30
Stress relaxation BS 7531	40 MPa, 16 h/300°C	MPa	27
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 300°C	% %	10 10
Tightness	DIN 28090-2	mg/s x m	0.05
Specific leakrate λ	VDI 2440	mbar x l/s x m	1.84E-05
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	5 7
Density		g/cm3	1.8
Average specific volume resistance	ρD	Ω cm	6.7x10E3
Thermal conductivity	λ	W/mK	0.69
Classification acc. to BS 7531:2006	Grade AX

Excellent sealing performance also at low bolt loads.
KLINGER® CompenSil delivers and maintains excellent sealing performance in all kind of applications. It is used for liquids and gaseous media at lower pressures and temperatures and low bolt loads. Additionally it provides good resistance against oils, hydrocarbons, refrigerants and other chemicals.

Basis

Unique combination of mineral fibers bonded with NBR.

Areas of application

KLINGER® CompenSil is ideal for use in applications where only low bolt loads are possible. It compensates inadequate bolting procedure and has best potential to seal even under irregular load allocation.

Key features

» High compressibility
» Excellent spring back behavior
» Resistant to creep and cold flow
» Dimensionally stable
» Consistent material composition

Benefits

» Provides superior adaptability to any sealing surface
» Seals irregular flanges
» Conforms easily
» Superior sealing at low stress
» Increased resistance against refrigerants

Certificates & Approvals

• DIN-DVGW
• DVGW VP 401
• TA-Luft (Clean air)
• DNV GL

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	22
Recovery ASTM F 36 J		%	45
Stress relaxation DIN 52913	50 MPa, 16 h/175°C 50 MPa, 16 h/300°C	MPa MPa	33 18
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 200°C	% %	18 22
Tightness	DIN 28090-2	mg/s x m	0.01
Thickness increase after fluid immersion ASTM F 146	oil IRM 903: 5 h/150°C fuel B: 5 h/23°C	% %	10 15
Density		g/cm3	1.5

POWER PLANTS

POTABLE WATER

CHEMICAL INDUSTRY

HEAVY INDUSTRY

ASBESTOS FREE

EASY TO CUT & FIT

NON TOXIC

ANTI-STICK MATERIAL

TEFLON İÇERİKLİ CONTALAR

PTFE bazlı ürünlerimiz, kimya, gıda, ilaç ve petrokimya başta olmak üzere buhar, oksijen ve agresif kimyasal ile kriyojenik uygulamarda kullanılabilen yüksek sıcaklık ve basınçlara dayanıklıdır. Yangın güvenlik (Fire Safe), gıdaya uygunluk (FDA), BAM sertifikasyonlarına sahiptir.

Tipik uygulama alanları, mevcut boyutlar, kalınlıklar, teknik özellikler ve kalite sertifikaları hakkında daha fazla bilgi için lütfen Soft Sızdırmazlık Kataloğumuzu indirin.

PDF Katalog İndir

KLINGER® top-chem 2000

KLINGER® top-chem 2003

KLINGER® top-chem 2005

KLINGER® top-chem 2006

KLINGER® soft-chem

SALMARCON® PURE PTFE

KLINGER® SEALEX

Exceptional performance at high mechanical requirements.
KLINGER®top-chem 2000 is a universal heavy-duty gasket, which offers an exceptional performance in applications with high mechanical requirements at high temperatures. The only PTFE gasket with a Fire-safe-certificate.

Basis

PTFE gasket filled with SiC (Silicon carbide).

Areas of application

Excellent resistance in strongly acidic and alkaline applications as well as to steam and oxygen. Suitable for an extremely wide range of applications in the chemical and petrochemical industry, as well as in the ship building industry for the transport of chemicals.

Key features

» Mechanically stable
» Resistant to creep and cold flow
» Consistent material composition

Benefits

» Resists high surface pressures also at elevated temperatures
» High retention of the bolt load
» Superior chemical resistance
» No ageing of the material

Certificates & Approvals

• DIN-DVGW
• DIN-DVGW W 270
• OXYGEN tested
• KTW-BWGL
• DNV GL
• WRAS approval
• TA-Luft (Clean air)
• Fire-Safe acc. to DIN EN ISO 10497
• FDA compliant (PTFE)
• Regulation (EU) No. 1935/2004 (incl.10/2011)

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 M		%	4
Recovery ASTM F 36 M		%	50
Stress relaxation DIN 52913	30 MPa, 16 h/150°C 50 MPa, 16 h/260°C	MPa MPa	28 36
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 260°C	% %	5 11
Tightness	DIN 28090-2	mg/s x m	0.08
Specific leakrate λ	VDI 2440	mbar x l/s x m	4.46E-06
Thickness/weight increase	H2SO4, 100%: 18 h / 23 °C HNO3, 100%: 18 h / 23 °C NaOH, 33%: 72 h / 110 °C	% % %	1/1 1/2 1/3
Density		g/cm3	2.5
Average surface resistance	ρO	Ω	6.9x10E12
Average specific volume resistance	ρO	Ω cm	2.2x10E12
Average dielectric strength	Ed	kV/mm	3.6
Average power factor	50 Hz	tan δ	0.166
Average dielectric coefficient	50 Hz	εr	10.6
Thermal conductivity	λ	W/mK	0.60

High adaptability and tightness even at low surface loads.
KLINGER®top-chem 2003 offers a high adaptability and tightness even at low surface loads.

Basis

PTFE gasket filled with hollow glass-microspheres.

Areas of application

Excellent chemical resistance in strongly acidic and alkaline applications as well as very good properties at medium temperatures and loads.

Key features

» High compressibility
» Consistent material composition
» Resistant to cold flow

Benefits

» Excellent sealing at low stress
» Superior chemical resistance
» Conforms easily
» No ageing of the material

Certificates & Approvals

• OXYGEN tested
• DIN-DVGW
• DIN-DVGW W 270
• KTW-BWGL
• DNV GL
• TA-Luft (Clean air)
• FDA conformity (components of KLINGER®topchem 2003 comply with the FDA requirements)
• Regulation (EU) No. 1935/2004 (incl. 10/2011)

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 M		%	18
Recovery ASTM F 36 M		%	35
Stress relaxation DIN 52913	30 MPa, 16 h/150°C	MPa	13
KLINGER cold/hot compression 25 MPa	thickness decrease at 23°C thickness decrease at 260°C	% %	10 39
Tightness	DIN 28090-2	mg/s x m	0.01
Specific leakrate λ	VDI 2440	mbar x l/s x m	3.29E-06
Thickness/weight increase	H2SO4, 100%: 18 h / 23 °C HNO3, 100%: 18 h / 23 °C NaOH, 33%: 72 h / 110 °C	% % %	1/1 0/5 1/5
Density		g/cm3	1.7
Average surface resistance	ρO	Ω	9x10E12
Average specific volume resistance	ρO	Ω cm	2.6x10E12
Average dielectric strength	Ed	kV/mm	16.7
Average power factor	50 Hz	tan δ	0.085
Average dielectric coefficient	50 Hz	εr	2.8
Thermal conductivity	λ	W/mK	0.18

High chemical resistance in strongly acidic applications.
KLINGER®top-chem 2005 offers an outstanding performance and a high chemical resistance in strongly acidic applications.

Basis

PTFE filled with inorganic fillers.

Areas of application

Suitable for a wide range of applications in the chemical industry. Economical alternative at the usage of filled PTFE gaskets.

Key features

» Mainly for use in acids
» Consistent material composition
» Resistant to cold flow

Benefits

» Excellent chemical resistance
» Very good mechanical properties at medium temperatures
» No ageing of the material

Certificates & Approvals

• OXYGEN tested
• DIN-DVGW
• WRAS approval
• KTW-BWGL
• DNV GL
• TA-Luft (Clean air)
• FDA conformity (components of KLINGER®topchem 2005 comply with the FDA requirements)
• Regulation (EU) No. 1935/2004 (incl. 10/2011)

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 M		%	4
Recovery ASTM F 36 M		%	40
Stress relaxation DIN 52913	30 MPa, 16 h/150°C	MPa	25
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 260°C	% %	5 35
Tightness	DIN 28090-2	mg/s x m	0.02
Specific leakrate λ	VDI 2440	mbar x l/s x m	8.75E-07
Thickness/weight increase	H2SO4, 100%: 18 h / 23 °C HNO3, 100%: 18 h / 23 °C NaOH, 33%: 72 h / 110 °C	% % %	1/1 1/2 -
Density		g/cm3	2.2
Average surface resistance	ρO	Ω	3.1x10E13
Average specific volume resistance	ρO	Ω cm	3.2x10E13
Average dielectric strength	Ed	kV/mm	23.8
Average power factor	50 Hz	tan δ	0.071
Average dielectric coefficient	50 Hz	εr	3.2
Thermal conductivity	λ	W/mK	0.42

Excellent chemical resistance in strong alkaline applications.
KLINGER®top-chem 2006 offers an excellent resistance in strongly alkaline applications and good mechanical properties at medium and low temperatures and loads.

Basis

PTFE filled with Barium sulfate.

Areas of application

Suitable for a wide range of applications in the chemical industry. This gasket material is free from pigments.

Key features

» Mainly for use in alkaline media
» Consistent material composition
» Resistant to cold flow

Benefits

» Excellent chemical resistance
» Very good mechanical properties at medium temperatures
» No ageing of the material

Certificates & Approvals

• OXYGEN tested
• DIN-DVGW
• DNV GL
• TA-Luft (Clean air)
• FDA conformity(components of KLINGER®topchem 2006 comply with the FDA requirements)

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 M		%	4
Recovery ASTM F 36 M		%	40
Stress relaxation DIN 52913	30 MPa, 16 h/150°C	MPa	18
KLINGER cold/hot compression 50 MPa	thickness decrease at 23°C thickness decrease at 260°C	% %	12 41
Tightness	DIN 28090-2	mg/s x m	0.01
Specific leakrate λ	VDI 2440	mbar x l/s x m	3.60E-06
Thickness/weight increase	H2SO4, 100%: 18 h / 23 °C HNO3, 100%: 18 h / 23 °C NaOH, 33%: 72 h / 110 °C	% % %	- 1/2 1/1
Density		g/cm3	3.0
Average surface resistance	ρO	Ω	1x10E13
Average specific volume resistance	ρO	Ω cm	1.2x10E13
Average dielectric strength	Ed	kV/mm	16.7
Average power factor	50 Hz	tan δ	0.083
Average dielectric coefficient	50 Hz	εr	4.2
Thermal conductivity	λ	W/mK	0.40

Sealing technology on a new level.
KLINGER® soft-chem brings the sealing technology on a new level and it is the best choice for operating conditions up to 260°C.

Basis

Multi-directional expanded PTFE.

Areas of application

Excellent corrosion resistance together with superior sealability create a high-grade gasket material for a wide field of applications in your plant.

Key features

» Multi-directional expanded PTFE
» Suitable for a wide range of applications

Benefits

» Easy to cut
» Excellent sealing at low stress
» Seals irregular flanges
» No ageing of the material

Certificates & Approvals

• Conforms to the regulation (EU) No. 1935/2004 (incl. 10/2011)
• FDA conformity (components of von KLINGER®soft-chem comply with the FDA requirements)

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 M		%	50 - 60
Recovery ASTM F 36 M		%	13 - 17
Stress relaxation DIN 52913	30 MPa, 16 h/150°C	MPa	15
KLINGER cold/hot compression 25 MPa	thickness at 23°C thickness at 150°C	% %	35 30
Tightness	DIN 28090-2	mg/s x m	0.01
Density		g/cm³	0.9

Polytetrafluoroethylene (PTFE) features tetrafluoroethylene polymer with unique combination of physical-chemical features that make it different from any other plastic material.

Basis

Tetrafluoroethylene polymer.

Areas of application

PTFE has a low heat transmission factor and can be therefore considered a thermoinsulating material. It also shows flame-retardant properties and is stable at 260°C for an indefinite length of time.

Key features

» Extreme chemical inertness
» Excellent heat resistance
» Optimum dielectric properties
» Zero hygroscopicity and maximum resistance against solvents
» Optimum resistance to ageing
» Self-lubricating properties and minimum friction coefficient.

Benefits

» Withstands virtually all chemical reactants
» It can only be swelled and melt by some highly fluorinated oils at temperatures around the crystalline melting point
» PTFE has optimum dielectric properties within a vast range of temperatures and frequencies
» Indifferent to all solvents up to 260°C

Certificates & Approvals

Please contact us for further information about certificates and approvals of our products.

Comparative technical values chart:

Properties	Test method	Unit	Pure PTFE
Specific gravity	ASTM D 1457/18	gr/cm3	2,14-2,2
Usage temperature	-	°C	-260 / +260
Melting temperature	ISO 3146	°C	325-330
Brittleness temperature	-	°C	-200
Pulling strength	ASTM D- 1708	kg/cm2	250-300
Elongation upon breaking	ASTM D- 1708	%	250-300
Resistance to stroke	ASTM D- 256	cm.kg/cm	15,5
Shore D hard	ASTM D-2240	-	53-57
Deformity under load 230°C, 1day, 140kg/cm2	ASTM D- 621	%	9,5-11
D-electric resistance	ASTM D - 149	KV/mm	50-80
Thermal conductivity	ASTM C - 177	Kcal/cm.°C.hour	0,035
Thermal expansion	ASTM E 831	10-5/°C	12-14
Inflamibility temperature	ASTM D - 1929	°C	530

Quick, easy to assemble – universal sealing on a roll!
KLINGER® SEALEX is a PTFE product manufactured from a unique, physically networked fibrillated material. It is composed of specially prepared fluorocarbons with excellent resistance to aggressive chemicals as well as offering secure sealing under high pressures, even permitting the use of the material in applications up to 150 bar internal pressure ratings.

KLINGER® SEALEX can be applied to any sealing face, giving excellent sealing performance even at low bolt loads.

Replacement of conventional gasket materials
KLINGER® SEALEX offers particular advantages in applications which prove difficult for conventional materials:
>> When the sealing surface or the stability of the flange prevents the successful use of a conventional seal.
>> When the geometry of the flange seating demands an intricate gasket shape, which is both difficult to assemble and uneconomic to manufacture.
>> When the flange material only permit the use of low bolt loads to seat the gasket but the media in the system and the associated interior pressure demands a high integrity seal.

These are just some of the areas in which you can use KLINGER® SEALEX . You may have other ideas for its use, either as a replacement for conventional gasketing or as a hidden reserve for unforeseen circumstances. Please call us for a sample and associated technical information on the product.

Nothing is left to chance with KLINGER® SEALEX .

Basis

PTFE product manufactured from a unique, physically networked fibrillated material.

Areas of application

Fume ducts, Concrete lids, Heat exchangers, Fiberglass, Reinforced plastic vessels, Pump or compressor housing flanges, Steam vessel flanges, Glass joints, Ceramic joints, Water systems, Valves and piping

Key features

» Fill flange imperfections for a tight
» Leak-free seal
» FDA compliant

Benefits

» Resistant to cold flow
» Easy handling
» No shelf-life concerns

Certificates & Approvals

• DVGW
Registration No. DG-5127BR0551
• BAM / Oxygen
Tested for oxygen at 60 bar and 60 °C (not for liquid oxygen)
• TA-Luft
tested (at 150 °C)
• FDA conform
(including adhesives)

Typical technical data for KLINGER Sealex:

Width / mm	Thickness / app. mm	Roll length / mm	Flange / DN
3	1,5	30	up to 50
5	2.0	20	up to 200
7	2.5	15	up to 600
10	3.0	8	up to 1500
14	5.0	5	from 1500
17	6.0	5	from 1500
20	7.0	5	from 1500
25	8.0	5	from 1500

POWER PLANTS

POTABLE WATER

CHEMICAL INDUSTRY

HEAVY INDUSTRY

ASBESTOS FREE

EASY TO CUT & FIT

NON TOXIC

ANTI-STICK MATERIAL

GRAFİTLİ CONTALAR

Perfore paslanmaz çelik sac ile takviye edilmiş veya takviyesiz grafit levhalar, max. çalışma şartları akışkan tipine bağlı olarak 200 bar 650 °C'dir. Yangın güvenlik (API 6FB Fire Safe) ve TA-LUFT(Clean Air) sertifikalıdır.

Tipik uygulama alanları,mevcut boyutlar, kalınlıklar, teknik özellikler ve kalite sertifikaları hakkında daha fazla bilgi için lütfen Soft Sızdırmazlık Kataloğumuzu indirin.

PDF Katalog İndir

SALMARCON SALGRAF SGS 0

SALMARCON SALGRAF SGS 3

SALMARCON SALGRAF SGS 3 NUCLEAR

KLINGER® LAMINATE GRAPHITE SLS

KLINGER® LAMINATE GRAPHITE PSM

The pure graphite gasket with rough sheet metal insert.

Basis

Glueless gasket material consisting of expanded graphite and a 0.1mm thick tanged stainless steel insert. The material is free from resins, impregnations or other organic compounds. Therefore it is free of eventual toxic risks. Stable physical properties over the whole temperature range.

Areas of application

KLINGER® Graphite Laminate PSM is suitable for hot water and steam at high temperatures up to 450°C.

Key features

» Mechanically bonded tanged stainless steel insert
» Free of organic resins or toxic risks
» Excellent chemical resistance
» Excellent high temperature resistance

Benefits

» Stable physical properties over the whole temperature range
» Provides excellent adaptability to any sealing surface
» Very good tightness
» Suitable for steam up to 450°C

Certificates & Approvals

• DIN-DVGW
• KTW-Guideline
• Fire-Safe acc. to DIN EN ISO 10497
• German Lloyd
• BAM tested

Typical technical data for thickness 2.0 mm:

			1.0 mm	1.5 mm	2.0 mm
Density of the graphite layer	DIN 28090-2	g/cm³	1.0	1.0	1.0
Purity of graphite*1	DIN 51903	%	≥ 99.0	≥ 99.0	≥ 99.0
Metallic reinforcement	Tanged metal Thickness Number of sheets	mm	1.4401 0.10 1	(oder 1.4404) 0.10 1	0.10 1
Compresibility	ASTM F36 A	%	25 - 35	30 - 40	35 - 45
Recovery	ASTM F36 A	%	15 - 20	15 - 20	12 - 18
Stress relaxation DIN 52913	16 h / 50 MPa / 300°C	MPa	≥ 46	≥ 46	≥ 46
KLINGER Cold/hot compression 50 MPa	Thickness decrease at 23°C Thickness decrease at 300 °C	% %	30 - 40 1 - 3	35 - 45 1 - 3	35 - 45 1 - 3
Specific leak rate λ	DIN 28090-2	mg/(s x m)	≤ 0.06	≤ 0.10	≤ 0.10
Chloride content of graphite layer*2	DIN 28090-2	ppm	≤40	≤40	≤40

*1) Nuclear quality with a purity of ≥99,8 available on request.
*2) Detailed specifications of the used graphite foils are found in our Graphite vademecum, which will be sent to you on request with pleasure.

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat.

Basis

Lorem ipsum dolor sit amet...

Areas of application

Lorem ipsum dolor sit amet...

Key features

» Lorem ipsum dolor sit amet
» Lorem ipsum dolor sit amet
» Lorem ipsum dolor sit amet

Benefits

» Lorem ipsum dolor sit amet
» Lorem ipsum dolor sit amet

Certificates & Approvals

• DIN-DVGW
• DIN-DVGW W 270
• Elastomer-Guidline
• DNV GL
• SVGW approval

Typical technical data for thickness 2.0 mm:

Compressibility ASTM F 36 J		%	25
Recovery ASTM F 36 J		%	45
Stress relaxation DIN 52913	50 MPa, 16 h/175°C	MPa	25
KLINGER cold/hot compression	thickness decrease at 23°C	%	20
50 MPa	thickness decrease at 300°C	%	32
Tightness	DIN 28090-2	mg/s x m	0.02
Thickness increase after fluid	oil IRM 903: 5 h/150°C	%	45
immersion ASTM F 146	fuel B: 5 h/23°C	%	30
CDensity		g/cm3	1.7
Average surface resistance	ρO	Ω	4.5x10E14
Average specific volume resistance	ρD	Ω cm	6.8x10E13
Average dielectric strength	Ed	kV/mm	13
Average power factor	50 Hz	tan δ	0.049
Average dielectric coefficient	50 Hz	εr	5.8

...

Salmarcon Salgraf SGS 0 sheets provide high elasticity, low permeability and thermal stability. Recommended to use at high temperature applciations and pressures for exhaust, steam, blow-out etc.

Basis

High quality expanded graphite.

Areas of application

General industry, Power generation, Petro-chemical, Oil & Gas industries, High-temperature and chemical equipment etc.

Key features

» Great thermal resistance
» High recovery and compressibility
» Blow-out safety
» Anti-sticking properties in accordance with ASTM F607
» Low sulfur content

Benefits

» Low leakage (conformity to DIN 3535-6)
» Fire-safety approved (API Specification 6FB)

Certificates & Approvals

Please contact us for further information about certificates and approvals of our products.

Typical technical data for thickness 2.0 mm:

Density of the graphite layer	DIN 28090-2	g/cm³	1.0
Purity of graphite	DIN 51903	%	≥ 99.5
Compresibility	ASTM F36 A	%	> 35
Recovery	ASTM F36 A	%	> 7
Chlorine content of graphite layer	DIN 28090-2	ppm	≤50

Salmarcon Nuclear graphite grade D flexible graphite foil.

Basis

High quality expanded nuclear graphite free of adhesives and binders. Inhibitors can be added to enhance the performance. Advanced grades like foil offer maximum protection against oxidation for greater reliability and longer service life.

Areas of application

High demanding, nuclear applications.

Key features

» Excellent chemical resistance
» High thermal shock capability
» Temperature range -250°C to +550°C

Benefits

» No penetration, running cold, or becoming brittle.
» Heat elimination and prevention of gasket burns

Certificates & Approvals

Please refer to our technical guideline regarding thermal stability.

Material data on SALMARCON NUCLEAR GRAPHITE (GRADE D):

Bulk density of graphite	DIN 28090-2	g/cm³	standard 1.0 (capability of 0.7 - 1.3)
Ash content of graphite	DIN 51903	%	≤0.15
Purity		%	≥99.85
Total chloride content		ppm	≤10
Total halogen content		ppm	≤40
Total sulphur content		ppm	≤10
Oxidation rate in air at 670°C (TGA)		%/h	≤4
Oxidation inhibitor			yes
Passive corrosion inhibitor	ASTM F 2168-13		yes

Salmarcon Salgraf SGS 3 sheets provide great chemical resistance, high elasticity and thermal stability. Recommended for aplications involving high sealing stress and where high blowout resistance is required.

Basis

Graphite laminate reinforced with a 316L tanged stainless steel core.

Areas of application

Power generation, petro-chemical, oil and gas industries, high-temperature and chemical equipment.

Key features

» Great chemical and thermal resistance
» High recovery and compressibility
» Low sulfur content
» Suitable for oxidising and corrosive medias (Salgraf SGS3 )
» Blow-out safety
» Anti-sticking properties in accordance with ASTM F607

Benefits

» Low leakage (conformity to DIN 3535-6)
» Fire-safety approved (API Specification 6FB)

Certificates & Approvals

» TA LUFT (Clean Air)
» FIRE SAFE (API 6 FB)

Typical technical data for thickness 2.0 mm:

Density of the graphie layer	DIN 28090-2	g/cm³	1.0
Purity of graphite	DIN 51903	%	≥ 99.5
Graphite and fibre based insert/ Metallic reinforcement	Plain metal Thickness	mm	AISI 316L 0.05/0.1
Compresibility	ASTM F36 A	%	> 35
Recovery	ASTM F36 A	%	> 7
Chlorine content of graphite layer	DIN 28090-2	ppm	≤50

The pure graphite gasket with a smooth stainless steel insert.
KLINGER® Graphite Laminate SLS is especially suitable for weak flanges at high temperatures up to 450°C.

Basis

The gasket material consists of expanded layers of graphite, wich are stuck to a 0.05mm thin smooth sheet metal foil made of 1.4401. The adhesive layer is applied via a precisely controlled process, wich makes it possible to keep the amount of adhesive below 1% of the amount of graphite in order to ensure uniform distribution of the adhesive.

Areas of application

KLINGER® Graphite Laminate SLS is suitable for universal use especially in combination with weak flanges (Email, glass) and for sealing of liquid level gauges.

Key features

» Stainless steel foil as insert
» Excellent chemical resistance
» Excellent high temperature resistance

Benefits

» Provides excellent adaptability to any sealing surface
» Seals irregular flanges
» Conforms easily
» Stable physical properties over the whole temperature range

Certificates & Approvals

• DIN-DVGW
• Fire-Safe acc. to DIN EN ISO 10497
• BAM tested

Typical technical data for thickness 2.0 mm:

			1.0 mm	1.5 mm	2.0 mm
Density of the graphite layer	DIN 28090-2	g/cm³	1.0	1.0	1.0
Purity of graphite*1	DIN 51903	%	≥ 99.0	≥ 99.0	≥ 99.0
Metallic reinforcement	Plain metal Thickness Number of sheets	mm	1.4401 0.05 1	(oder 1.4401) 0.05 1	0.05 0.05 1
Compresibility	ASTM F36 A	%	40 - 50	40 - 50	40 - 50
Recovery	ASTM F36 A	%	10 - 15	10 - 15	10 - 15
Stress relaxation DIN 52913	16 h / 50 MPa / 300°C	MPa	≥ 45	≥ 45	≥ 45
KLINGER Cold/hot compression 50 MPa	Thickness decrease at 23°C Thickness decrease at 300 °C	% %	42 - 48 2 - 4	42 - 48 2 - 4	45 - 50 2 - 4
Specific leak rate λ	DIN 28090-2	mg/(s x m)	≤ 0.06	≤ 0.10	≤ 0.10
Chloride content of graphite layer*2	DIN 28090-2	ppm	≤40	≤40	≤40

POWER PLANTS

POTABLE WATER

CHEMICAL INDUSTRY

HEAVY INDUSTRY

ASBESTOS FREE

EASY TO CUT & FIT

NON TOXIC

ANTI-STICK MATERIAL

MİKA ESASLI CONTALAR

Yüksek sıcaklık uygulmaları için geliştirilmiş olan KLINGER Milam PSS, mika bazlı ve 900°C ve üzeri sıcaklıklarda güvenli kullanıma uygundur.

Tipik uygulama alanları, mevcut boyutlar, kalınlıklar, teknik özellikler ve kalite sertifikaları hakkında daha fazla bilgi için lütfen Soft Sızdırmazlık Kataloğumuzu indirin.

PDF Katalog İndir

KLINGER® MILAM PSS

High temperature gasket material for temperatures up to 900 °C and higher.
KLINGER®milam PSS is suitable for highest temperature applications.

Basis

Mica-based sealing material with perforated 0.1 mm thick stainless steel reinforcement made of 1.4401 or AISI 316.

Areas of application

The particular property of this material is the outstanding thermal stability. The weight loss at 800°C is less than 5%. In combination with excellent chemical resistance to solvents, aggressive acids, alkalis and mineral oils it offers interesting application possibilities.

Key features

» Tanged stainless steel 1.4401 insert
» Impregnated with high quality silicone oil
» Free of fibres
» Superior high temperature resistance
» Excellent chemical resistance

Benefits

» Ideal for temperatures up to 900°C and higher
» Recommended for exhaust systems
» Extremely high oxidation resistance

Certificates & Approvals

• German Lloyd

Typical technical data for sheet thicknesses:

			PSS 130	PSS 200	PSS 300
Compressibility	ASTM F36 J	%	12 - 16	13 - 19	17 - 25
Recovery	ASTM F36 J	%	35 - 45	35 - 45	30 - 40
Stress relaxation DIN 52913	16 h / 50 MPa / 300°C	MPa	33	33	30
Tensile strength DIN 52910		MPa	22	21	20
Tensile strength ASTM F 152		MPa	25	24	21
Ignition loss DIN 52911		%	< 5	< 5	< 15
Sealability for nitrogen at 30 MPa und 6 bar, temperature within 100 to 400°C max (sample size 90 x 50 mm)		ml/min	0.20	0.20	1.0
Thickness increase	ASTM F 146, Oil IRM 903: 5 h /150°C	%	12	12	5
Weight increase	ASTM F 146, Oil IRM 903: 5 h /150°C	%	26	26	28
Max. gasket load		MPa	100	80	80
Density 3754		g/cm³	2.1	2.1	1.8
Max. temperature*		°C	900	900	900
Thickness		mm	1.3	2.0	3.2
Number of stainless steel reinforcements			1	1	2
Material tanged stainless steel			1.4401	or 1.4404

* depending on installation and service conditions.

POWER PLANTS

POTABLE WATER

CHEMICAL INDUSTRY

HEAVY INDUSTRY

ASBESTOS FREE

EASY TO CUT & FIT

NON TOXIC

ANTI-STICK MATERIAL

KAUÇUK LEVHALAR

NBR, Neoprene, Silikon (VMQ), EPDM (Siyah & Beyaz), Viton (FKM) ve NR başta olmak üzere oldukça çeşitli kalitede, farklı endüstrilerin bünyesindeki kimyasal ve çalışma koşullarına uygun kauçuk ürünler.

Tipik uygulama alanları, mevcut boyutlar, kalınlıklar, teknik özellikler ve kalite sertifikaları hakkında daha fazla bilgi için lütfen Soft Sızdırmazlık Kataloğumuzu indirin.

SALMARCON SILICONE/VMQ

SALMARCON VITON/FKM

SALMARCON WHITE EPDM

Salmarcon EPDM sheets has excellent phsyical/mechanical properties; it is resistant to acids, chemicals, heat, atmospheric/weathearing and sea water.

Basis

Ethylene Propylene Diene Monomer Rubber.

Areas of application

Chemical Industry, Automotive, Construction and industrial proces piping such as water treatment, acids, alkalis, alcohol, ozone, strong and oxidizing chemicals.

Key features

» Perfect weather, sunlight and ozone resistant
» Excellent tear and abrasion resistance
» Good compression set

Benefits

» High tensile strength
» Good chemical resistance
» High electrical resistance

Certificates & Approvals

Please contact us for further information about certificates and approvals of our products.

Main characteristics chart:

Elasticity	Compression	Abrasion	Flame	Fuels	Ozone
Good / Sufficient	Good / Sufficient	Sufficient	Sufficient	Unsuitable	Good

SALMARCON EPDM technical chart:

Characteristics	Units of measure	Specifications	Values	Tolerance
Hardness (H)	Sh.A3	ISO 7619	70	+/- 5
Tensile strength (CR)	MPa	ISO 37-1	5	min.
Elongation at break (AR)	%	ISO 37-1	250	min.
Tear strength	N/mm(.)	ISO 34-C	15	min.
Abrasion resistance	mm3	ISO 4649
Specific gravity	g/cm3	ISO 2781	1,33	+/- 0,03

Salmarcon NBR sheets are based on NBR (high grade) highly resistant to oils at high temperature.

Basis

Nitrile butadiene rubber.

Areas of application

NBR gaskets provide superior resistance to Petrochemical Industry (Oil & Gas), transformer oils, petroleum-based fluids, hydraulic fluids, solvents, gasoline, alkalis and acids.

Key features

» Good mechanical properties
» Great elasticity
» Perfect oil and gas resistance

Benefits

» Excellent impact and tensile strength
» Good abrasion resistance
» Good elongation properties and excellent compression set resistance

Certificates & Approvals

Please contact us for further information about certificates and approvals of our products.

Main characteristics chart:

Elasticity	Compression	Abrasion	Flame	Fuels	Ozone
Good / Sufficient	Good / Sufficient	Sufficient	Sufficient	Sufficient	Sufficient

SALMARCON NBR technical chart:

Characteristics	Units of measure	Specifications	Values	Tolerance
Hardness (H)	Sh.A3	ISO 7619	70	+/- 5
Tensile strength (CR)	MPa	ISO 37-1	5	min.
Elongation at break (AR)	%	ISO 37-1	250	min.
Tear strength	N/mm(.)	ISO 34-C	15	min.
Abrasion resistance	mm3	ISO 4649
Specific gravity	g/cm3	ISO 2781	1,55	+/- 0,03

Salmarcon Neoprene sheets are based on chloroprene rubber with excellent physical/mechanical properties; they are highly resistant to the atmospheric agents, ozone, oil and solvents.

Basis

Chloroprene Rubber.

Areas of application

Petroleum based oils and fuels, ozone, solvent, chemical and heat resistance.

Key features

» Weather and Ozone resistant
» Good elasticity
» Excellent aging resistance

Benefits

» Excellent flame resistance
» Excellent oil and solvent resistance
» Perfect abrasion resistance

Certificates & Approvals

Please contact us for further information about certificates and approvals of our products.

Main characteristics chart:

Elasticity	Compression	Abrasion	Flame	Fuels	Ozone
Good	Good	Sufficient	Excellent	Good / Sufficient	Good

SALMARCON Neoprene technical chart:

Characteristics	Units of measure	Specifications	Values	Tolerance
Hardness (H)	Sh.A3	ISO 7619	60	+/- 5
Tensile strength (CR)	MPa	ISO 37-1	12	min.
Elongation at break (AR)	%	ISO 37-1	400	min.
Tear strength	N/mm(.)	ISO 34-C	35	min.
Abrasion resistance	mm3	ISO 4649
Specific gravity	g/cm3	ISO 2781	1,42	+/- 0.03

Sheet based on natural rubber with good physical/mechanical properties.

Basis

Natural rubber.

Areas of application

Petrochemical, chemical industries , used for oils and gases.

Key features

» High tensile strength
» Good resistance to abrasion and gouging
» Good compression set

Benefits

» Great elasticity
» Good tear resistance
» High electrical resistance

Certificates & Approvals

Please contact us for further information about certificates and approvals of our products.

Main characteristics chart:

Elasticity	Compression	Abrasion	Flame	Fuels	Ozone
Good / Excellent	Good / Excellent	Good / Excellent	Poor	Unsuitable	Poor

SALMARCON NR technical chart:

Characteristics	Units of measure	Specifications	Values	Tolerance
Hardness (H)	Sh.A3	ASTM D 2240	45	+/- 5
Tensile strength (CR)	MPa	ASTM D 412C	10	min.
Elongation at break (AR)	%	ASTM D 412C	400	min.
Tear strength	N/mm(.)	ASTM D 624B	40	min.
Abrasion resistance	mm3	DIN 53516
Specific gravity	g/cm3	DIN 53479	1,10	+/- 0,03

Salmarcon SBR is economic rubber and suitable for general uses; it can be used when particular physical/mechanical properties are not required.

Basis

Styrene Butadiene Rubber

Areas of application

Shipyard, water, grease and weak acids.

Key features

» Good water resistance
» Abrasion resistance
» Perfect impact strength

Benefits

» Sufficient elasticity
» High tensile strength
» Good resilience

Certificates & Approvals

Please contact us for further information about certificates and approvals of our products.

Main characteristics chart:

Elasticity	Compression	Abrasion	Flame	Fuels	Ozone
Sufficient	Sufficient	Sufficient	Good / Sufficient	Unsuitable	Unsuitable

SALMARCON SBR technical chart:

Characteristics	Units of measure	Specifications	Values	Tolerance
Hardness (H)	Sh.A3	ISO 7619	70	+/- 5
Tensile strength (CR)	MPa	ISO 37-1	3	min.
Elongation at break (AR)	%	ISO 37-1	200	min.
Tear strength	N/mm(.)	ISO 34-C	15	min.
Abrasion resistance	mm3	ISO 4649
Specific gravity	g/cm3	ISO 2781	1,65	+/- 0,03

Salmarcon Silicone sheets has excellent resistance at high temperature and atmospheric agents; high insulation factor; low flamability, resistance to chemicals, corrosion, ozone and radiation.

Basis

Vinyl Methyl Silicone.

Areas of application

Chemical industry, Food Processing (FDA Certified), Medical Industry, Aerospace etc.

Key features

» Excellent weathering, Sunlight (UV) and ozone resistance
» High heat and oxidative stability
» Low flammability

Benefits

» Good insulation property
» Resist on hot and cold temperature extremes
» Safe to use in the food and medical industry

Certificates & Approvals

FDA Certified.

Main characteristics chart:

Elasticity	Compression	Abrasion	Flame	Fuels	Ozone
Good	Good	Sufficient	Good	Unsuitable	Excellent

SALMARCON Silicone VMQ technical chart:

Characteristics	Units of measure	Specifications	Values	Tolerance
Hardness (H)	Sh.A3	ISO 7619	60	+/- 5
Tensile strength (CR)	MPa	ISO 37-1	6	min.
Elongation at break (AR)	%	ISO 37-1	300	min.
Tear strength	N/mm(.)	ISO 34-C	15	min.
Abrasion resistance	mm3	ISO 4649
Specific gravity	g/cm3	ISO 2781	1,16	+/- 0,03

Salmarcon Viton, quality based on Fluorinated rubber (FKM) with excellent weathering, oxidation and ozone resistance. Suitable to use for fuels, chemicals and oils. They also have excellent resistance at high temperature and flame resistance property.

Basis

Fluoroelastomers (FKM).

Areas of application

Petrochemical, Chemical industry, Food industry, Pharmaceutical etc. (fuels, oils, alkalis, animal and vegetable oils, chlorinated hydrocarbons and concentrated acids).

Key features

» Weather, UV and ozone resistant
» Perfect oxidation resistant
» Excellent oil and chemical resistance

Benefits

» Perfect resistance to high temperatures
» Excellent flame resistance
» Proper to use in Food Industry (FDA Certified)

Certificates & Approvals

FDA Certified.

Main characteristics chart:

Elasticity	Compression	Abrasion	Flame	Fuels	Ozone
Unsuitable	Good	Sufficient	Excellent	Excellent	Excellent

SALMARCON Viton/FKM technical chart:

Characteristics	Units of measure	Specifications	Values	Tolerance
Hardness (H)	Sh.A3	ISO 7619	75	+/- 5
Tensile strength (CR)	MPa	ISO 37-1	9	min.
Elongation at break (AR)	%	ISO 37-1	170	min.
Tear strength	N/mm(.)	ISO 34-C	20	min.
Abrasion resistance	mm3	ISO 4649
Specific gravity	g/cm3	ISO 2781	1,90	+/- 0,03

Salmarcon White EPDM sheets have excellent phsyical/mechanical properties; material is resistant to acids, chemicals, heat, atmospheric/weathearing conditions as outdooor usage and ozone.

Basis

Ethylene Propylene Diene Monomer Rubber.

Areas of application

Food industry and industrial proces piping such as water treatment, acids, alkalis, ozone and chemicals.

Key features

» Weather and Ozone resistant
» Great elasticity
» Good compression set

Benefits

» Good resistance to ageing
» Seals even with low surface load
» FDA certified (can be used in food industry)

Certificates & Approvals

FDA certified

Main characteristics chart:

Elasticity	Compression	Abrasion	Flame	Fuels	Ozone
Good	Good	Good / Sufficient	Sufficient	Unsuitable	Excellent

SALMARCON WHITE EPDM technical chart:

Characteristics	Units of measure	Specifications	Values	Tolerance
Hardness (H)	Sh.A3	ISO 7619	60	+/- 5
Tensile strength (CR)	MPa	ISO 37-1	12	min.
Elongation at break (AR)	%	ISO 37-1	550	min.
Tear strength	N/mm(.)	ISO 34 C	15	min.
Abrasion resistance	mm3	ISO 4649
Specific gravity	g/cm3	ISO 2781	1,16	+/- 0,03

YARI METAL CONTALAR

Yarı metalik contalar, özellikle yüksek basınç ve yüksek sıcaklık ortamlarında çok çeşitli uygulamalar için kullanılabilen, ideal ve güvenilir conta türleridir.

Salmarcon olarak müşterilerimize oldukça yüksek adetlerde stok ürün ve hızlı teslim süresi sunmakta olduğumuz yarı metal grubundaki ürünlerimiz aşağıdaki gibidir ;
›› Spiral Sarımlı Conta,
›› Corrugated (Ondüleli) Conta,
›› Kammprofile (Grooved/Yivli) Conta,
›› Metal Takviyeli Kauçuk Conta ,
›› Özel Üretim (Custom Made) Contalar, ,
›› ve daha fazlası..

Standart ürünlerin kullanıma uygun olmadığı ve tesis gereksinimlerini karşılamadığı noktalarda, müşterilerimizin ihtiyaçlarını birebir karşılayacak şekilde tecrübeli mühendislik ekibimiz ile en ideal tasarım ve çözümleri geliştirmekteyiz.

SALMARCON SPİRAL SARIMLI CONTALAR

SALMARCON KAMMPROFİLE (YİVLİ) CONTALAR

SALMARCON CORRUGATED (ONDÜLELİ) CONTALAR

SALMARCON METAL CEKETLİ CONTALAR

SALMARCON METAL TAKVİYELİ KAUÇUK CONTALAR

SALMARCON ÖZEL ÜRETİM CONTALAR

PDF Katalog indir

SALMARCON CORRUGATED GASKETS

Corrugated gaskets are universally applicable sealing elements.

Due to the wide range of shapes that they can be produced in - including rings, ovals, elongated ovals or frames, with or without dividers, holes and retaining plates -they continue to be used in new areas. The gaskets can be fully or partially coated. Corrugated gaskets with torque support have proven excellent when used with inflexible flanges.

Corrugated gaskets advantages:
›› Outstanding mechanical strength and thermal conductivity
›› Capable of withstanding high temperatures
›› There are almost no limitations regarding size
›› Solid construction provides stability even for large diameters and ensures trouble-free handling and installation.

Even with unmachined flanges, a satisfactory seal can be achieved with the use of suitable soft-material layers. The gaskets can be produced in all the usual sizes up to 6000 mm.

Basis
Stainless steel with a Graphite foil.

Areas of application

» Petro- Chemical industry
» Steam applications
» Oil and gas industry
» Pressure vessels
» Heat exchanger applications

Key features

» Can be produced in - including rings, ovals, elongated ovals or frames
» Can be produced with or without dividers, holes and retaining plates
» Can be produced in all the usual sizes up to 6000 mm

Benefits

» Ideal for older plants and equipment
» Improved resistance to radial shear and thermal cycling
» Effective at low seating stress levels
» Better sealability compared to traditional gasket design

CUSTOM MADE AND SPECIALTY GASKETS

With our own technology, knowledge and experience at Salmarcon we are capable of meeting various customer needs.

In close co-operation with customers, we develop and produce special types of gaskets for various applications. Gaskets are produced up to a size 700mm in different types for the most demanding applications in almost any industry.

Custom gaskets are made to customer's owb drawing and specification, samples and templates. We can provide solution for almost any customer requirements.

Basis

All material types to fit the most demanding applications in almost any industry.

Areas of application

» Petro- Chemical industry
» Powerplants
» Ship building
» Steam applications
» Heat exchangers and coolers
» Valves, Flanges and many more

Key features

» Custom made gaskets according to customers specifications
» Special large single piece gaskets up to 4000 mm in size
» High temperature resistance with plenty materials to choose from
» Capability to compensate for irregularities on flanges
» Our skilled team can provide the solution for almost any customer requirements

Benefits

» Semi-Automatic Semi-metal production line
» Powder painting and polishing line
» Welding line
» Laser marking and quality control extension
» Cammprofiles and Metal jacket production set

SALMARCON KAMMPROFILE

Kammprofile gaskets are excellently suited for sealing of media under extreme operating conditions, such as high operating pressures and temperatures.
Such solutions are ideal replacements for problem applications associated with other similar gaskets such as:
- metal jacketed
- solid metal
- solid graphite
- or PTFE gaskets.

Kammprofile gaskets are also prefable due to core material can be re-used.

The Salmarcon Kammprofile is a composite gasket which utilizes a serrated metal core with a soft facing material. The metal core is a machined on each contact face with concentric serrations which provide high pressure areas, ensuring that the soft coating flows into any imperfections in the flange even at relatively low bolt loads.
The soft facing material is engineered to compress into the serrations on the core and form a thin film across the peaks creating the ideal sealing density in the grooves of the profile. The result is a gasket which combines the benefits of soft cut materials with the advantages of seal integrity associated with metallic gaskets.

Basis
Graphite, Mica, PTFE or Klingersil C4430 layers with steel cores (SS316-SS304-Duplex-Titanium etc.) as per request or project requirements.

Areas of application
» Petro- Chemical Industry
» Steam applications
» Pipeline systems
» Pressure vessels
» Heat exchangers and coolers

Key features

» Withstand seals pressure up to 250bar
» Suitable for temperature up to 1000ºC
» Can be used with male and female flanges

Benefits

» Great mechanical stability
» Excellent sealing performance in varying temperature and preesure conditions
» Efficiency at varying levels of seating stress
» Slow aging of the material

Certificates & Approvals

• TA-Luft (Clean air)
• Fire Safe (API 6FB)

SALMARCON METAL JACKETED GASKETS

The most basic type of semi-metallic gaskets combining the high pressure suitability and blow out resistance of metallic materials with the improved compressibility of soft materials.

Metal jacketed gaskets offer an economical seal where sealing faces are narrow and can be produced in a variety of shapes, making them a good option for heat exchanger jointing.
General Properties:
›› Economical
›› Easy to handle and install
›› Suitable for high temperatures
›› Suitable for narrow flanges
›› Good blow-out resistance

Applications:
›› Heat exchangers
›› Exhaust gases
›› Valve bonnet gaskets
›› Narrow flanges

Basis
Metallic outer shell with either a metallic or non-metallic compressed fibre filler.

Areas of application

» Oil and Gas industry
» Heat exchanger applications
» General industry » Automotive industry

Key features

» Ideal for assemblies that require a thin-flanged gasket
» Well-suited for the sealing of heat exchangers
» Higher-quality surface sealing of gaskets compared to non-metallic gaskets

Benefits

» Easy handling, solid construction and easy installation
» Ideal for medium- and high-pressure applications
» Excellent chemical resistance
» Suitable for extreme temperature and pressure

SALMARCON RUBBER STEEL GASKETS

Rubber-steel gaskets have amassed a wide range of applications in sealing technology. Wherever the secure sealing of media with an exceptionally low leak rate, as well as low bolt loads at relatively low temperatures is required, rubber-steel gaskets provide the optimal solution.

Rubber steel gaskets advantages and properties:
›› Self-centering with the same flange DN and PN
›› Appropriate tightening torques
›› Self-limiting compression surface
›› Rigid gasket, easy to install
›› Soft surface in order to seal slightly damaged flange surfaces
›› Materials of KLINGER®KGS: NR, NBR, EPDM, CSM, FKM
›› Dimensions according to EN 1514-1 depending on DN: PN 6 to PN 40 / DN 15 up to DN 2000

Rubber-metal-gaskets are used where safe sealing of conventional up to special industrial media such as gases and liquids are required under usual installation conditions like temperatures, pressures, and forces.
KLINGER KGS rubber-steel seals, the unique and patented adjustable seal KLINGER KGS VD and our KLINGER wall collar offer reliable sealing in water supply and disposal, in plant construction, in gas supply and in building protection.

Basis
Vulcanized rubber mixture, lens-form, rounded at the edges, vulcanized steel ring inside.

Areas of application

» Gas and water supply
» Chemical industry
» Waste water systems
» Vacuum operated pipelines constructions

Key features

» Good reception of the surface load
» Outer diameter self-centering at the inner bolt circle
» Excellent at high flange and screw forces, can easily be absorbed

Benefits

» Excellent in gasket blow-out prevention
» Exceptionally low leak rate
»Low bolt loads at relatively low temperatures
» Seals securely even in uneven locations

SALMARCON SPIRAL WOUND GASKETS

Spiral wound gaskets can recover under the action of fluctuating loads caused by process fluid pressure and temperature changes, flange face temperature variations, flange rotation, bolt stress relaxation and creep.

The gasket sealing element consists of a pre-formed metallic winding strip with layers of a softer, more compressible sealing material which, during compression, is densified and flows to fill imperfections in the flange surfaces when the gasket is seated.

The metal strip holds the filler giving the gasket mechanical resistance and resilience. Salmarcon spiral wound gaskets can be manufactured from a range of filler materials according to different service conditions.

Basis

Inner and outer metal core. PTFE, Mica and Graphite fillers.

Areas of application

» Refineries
» Chemical plants
» Gas installations
» Water treatment
» General pipeline construction

Key features

» Can be produced in all sizes from DN 10 or 1/2'' to a diameter of 4 metres
» Can be produced in oval-shaped spiral-wound gaskets for the valve and apparatus construction industries
» Oval-shaped inner and/or outer rings are also possible.

Benefits

» Can withstand extreme operational conditions
» No need to support the spiral with an inner ring at smaller nominal diameters
» Lower seating stress required with higher leak-tightness

Certificates & Approvals

• TA-Luft (Clean air)
• Fire Safe (API 6FB)
• ASME B16.20 Performance Test
METAL CONTALAR

Salmarcon,kimyasal olarak en agresif, yüksek sıcaklık ve yüksek basınç uygulamalarını kapsayacak şekilde çok çeşitli alaşımlarda metalik contalar üretmektedir.

Metalik contalar Soft Iron, Low Carbon Steel, Monel, Duplex, Titanyum, Hastelloy, Inconel gibi malzemelerden veya özel alaşımlardan üretilmektedir. Metalik contalar özellikle yüksek basınç sınıfı ve yüksek sıcaklıklarda kullanılmak üzere tasarlanmıştır.

Metalik ürün grupları içerisinde, özellikle saha montaj faaliyetlerinde kolaylık sağlayan ve kaynak fit-up işlemlerinde olukça yaygın olarak kullanılan Welding Ring ve Duplex, Titanyum, Hastelloy, Inconel malzeme kaliteleri gibi yüksek alaşımlı metalik boru, flanş ve diyaframlar yer almaktadır;
›› Ring Tipi (RTJ) Contalar,
›› Norsok Seal Ring (IX Tip) Contalar,
›› Lens Ring Tipi Contalar,
›› Welding Ringler,
›› Diyaframlar,
›› Özel Alaşımlı Boru ve Flanşlar,
›› Özel Üretim Metalik contalar,
›› ve daha fazlası.

SALMARCON RİNG TİPİ CONTALAR (RTJ)

SALMARCON WELDİNG RİNGLER

NORSOK IX TİP RİNGLER

LENS RİNG TİPİ CONTALAR

DİYAFRAM VE ÖZEL ÜRETİM CONTALAR

BORULAMA MALZEMELERİ

ALAŞIMLI FLANŞLAR

PDF Katalog indir

ALLOY FLANGES

Salmarcon alloy flanges show excellent corrosion and oxidation resistance. We supply also Special Alloy Flanges as tailor made solutions for your project requirements.

Basis

Super Duplex, Duplex, Nickel Alloy and, Titanium Gr.2, Gr.7, Gr.10, Gr.12 as well as S32750, S31813, Monel, İnconnel, Duplex, Super Duplex and more.

Areas of application

» Food production
» Oil and gas industry
» Water supply
» Chemical plants and many more

Key features

» Mechanically stable
» Resistant to creep and cold flow
» Consistent material composition

Benefits

» Resists high surface pressures also at elevated temperatures
» High retention of the bolt load
» Superior chemical resistance
» No ageing of the material

DIAPHRAGM SEAL GASKETS AND SPECIAL PRODUCTS

Metal diaphragm seal for the welding is a type of gasket used for flat covers in exchangers operating works at high temperatures, high pressures or with a high level of both of these two parameters in same time.
They are also used for the hazardous conditions like as in hydrogen installations.

Basis

They are made of a thin plates of special alloys (Alloy 20, Hastelloy, Monel, Inconel, titanium) , stainless steels (several grades) or several other metals are in common use where high pressure and high temperature ratings and specific chemical compatibility are required.

Areas of application

General Industry, Petrochemical (Oil & Gas), Shell & Tube Heat Exchangers especially for high temperature and high temperatures.

Key features

» Suitably to used for the hazardous conditions
» Excellent high temperature and pressure property
» Certain elasticity; it is reducing the stress generated by either welding or by exposure to pressure and temperature.

Benefits

» Their sphericity is closely matched to the motion conditions and ensures consistent moves of its peripheral part as well as that of the internal part of the shell
» Provide ‘side’ access to ‘main weld’ during installation and dismantling, facilitate reusing of diaphragm (especially important when often open – close operations necessary)
» Reduce cost and expenses of the re-install as no flange refurbishment is necessary (after the main weld cut off).

LENS RING TYPE JOINT GASKET

The lens ring type Joint gasket is usually a line contact seal for use in high pressure piping devices as well as in pressure vessel heads. This lens cross section is often a spherical gasket surface area and requires specific machining on the flanges. In obtaining lens gaskets, complete drawings and product technical specs need to be supplied.

Basis

Soft iron, SS 304, SS 316L, SS 321, SS 347, 5Cr-0.5Mo, Inconel 600, Incoloy 825, Monel 400, Nickel 200, Hastelloy B2, Hastelloy C276 Lens Ring Type Joint Gasket.

Areas of application

» Oil and gas
» Petrochemical and offshore industries vessel heads
» Valves and pipe works assemblies

Key features

» With our lines of advanced machine, quality tesing machine and skilled technical workers we can make all kinds of LRT joint gaskets
» For the use with high pressure piping devices
» For the use with high pressure vessel heads

Benefits

» Resists high surface pressures also at elevated temperatures
» Superior chemical resistance
» No ageing of the material

NORSOK IX METALLIC SEAL RING GASKETS

The IX seal ring design exists in one size per DN covering all pressure classes in this product standard and the ring gaskets usually be coated with PTFE.

The NORSOK IX seal ring gaskets are designed and used where the NORSOK CFC (Compact Flange Connections) are in use. The IX seal ring is designated as described in the Key features. The designation elements shall be separated by / (slash). The number of characters is not fixed.

Basis

Low Carbon Steel, Duplex, and Inconel 625 with various type of materials as per requests.

Areas of application

NORSOK IX seal ring gaskets are mainly used for high pressure and high temperature applications when applying as per NORSOK L-005 Compact Flanged Connections .

Key features

» Standard identification - NCF5
» Type - and ring size - IX and the appropriate DN
» Material designation

Benefits

» High integrity seal at high pressures
» PTFE coating improves corrosion resistance and provides easy identification
» Good chemical resistance
» Designed to create a high integrity joint with primary and secondary seals

PIPING MATERIALS

The piping system is the lifeline of industrial processes. Generally, it includes the complete interconnection of pipes and components like pipe fittings, flanges, tanks, pressure hoses, joints, traps, pumps, gaskets, and valves.

Piping and Special piping materials that we produce hinder the effects of heat, corrosion and high temperature.

Basis

Super Duplex (UNS S32750) , Duplex (UNS S31803), Nickel Alloy and Titanium Gr.2, Gr.7, Gr.10, Gr.12 as well as Monel, Inconel, Duplex, Super Duplex and more.

RING TYPE JOINTS

Ring Type Joints [RTJ] are heavy-duty, high-pressure gaskets largely used in offshore petrochemical applications and can be manufactured from a number of materials to suit the process media and the flange materials.

RTJ are precision machined metallic rings which are designed to be used with API 6B, ASME B16.5 and API 6BX [dependent on the gasket style] flanges. As indicated, RTJs are often used in offshore applications and certain styles can be adapted for subsea installation.

We hold a large range of RTJs in stock in a number of profiles and materials.

Basis

Metal, Carbon, Monel, Inconel, Titanium and various coating or as per request.

Areas of application

›› Oil processing
›› Petrochemical industry
›› Powerplants
›› Grooved flanges

General properties

» Economical
» Easy to handle and install
» Suitable for high temperatures
» Good blow-out resistance

Benefits

» Withstands up to 1000°C
» Bares pressure up to 1300 bar
» Superior chemical resistance
» No ageing of the material

SALMARCON WELDING RING

Welding Ring (Gapolet) is a split ring that is engineered and designed to give you a pre measured 1/16″ minimum gap for socket welds.

Basis

Certified stainless steel.

Areas of application

» Power piping nuclear
» Conventional, Industrial piping
» Petrochemical and Fertilizer plants
» Ship building etc..

Key features

» Resists corrosion from chemicals, radioactive materials, and water.
» The spring tension makes it fit tightly into all standard sized fittings from 1/4" to 2". (Non-standard sizes are available upon request).
» Consistent material composition

Benefits

» Once inserted into the fitting the ring becomes a permanent part of the joint.
» It will not rattle or vibrate even under extreme pressure.
» Superior chemical resistance
» No ageing of the material
CİVATA & SOMUNLAR

Saplama, somun ve civata gibi bağlantı elemanları tüm endüstriyel ekipman ve hatlardaki flanş bağlantılarında oldukça kritik rol oynamaktadır.

Başlıca Petrokimya, Enerji Santralleri, Gaz Endüstrisi, Kimya Sanayi ve Endüstriyel sanayi alanındaki yüksek sıcaklık ve yüzey basınçları gerektiren noktalarda veya özel kimyasalların kullanıldığı endüstriyel tesislerin yüksek kalite standartlarına uygun şekilde üretilmektedir.

Bağlantı elemanları kapsamındaki ürünlerimiz ;
›› Metrik (DIN Normu) ve Inch (ASME) standartlarına uygun,
›› Müşterilerimizin özel talepleri ve teknik detaylara uygun özel üretimler,
›› M6- M100 arası DIN normunda üretim,
›› 1/4"-8" arası ölçülerde ASME standartında üretim,
›› ASTM/ASME/ISO/BSI standartlarına uygun Çinko, Sıcak Daldırma Galvaniz (HDG), Elektro Galvaniz (EG), Geomet, Teflon XYLAN/XYLAR gibi çok çeşitli kaplama yöntemleri,
›› Müşterilerimizin özel taleplerine uygun kaplama çeşitleri.

Saplama (Stud Bolts) ;
›› M6- M100 arası ölçülerde DIN normunda üretim,
›› 1/4"-8" arası ölçülerde ASME standartında üretim,
›› A193 Gr.B7, A193 Gr.B7M, A193 Gr.B8, A193 Gr.B8M, A193 Gr.B16, A320 Gr.L7, A320 Gr.L7M vb. standart kalitelerde üretim,
›› Titanyum, Duplex/Super Duplex, Inconel, Monel gibi özel alaşımlarda üretim,
›› Teknik resim veya müşteri taleplerine göre özel üretim,
›› Çinko, Sıcak Daldırma Galvaniz (HDG), Elektro Galvaniz (EG), Geomet, Teflon XYLAN/XYLAR gibi ASTM/ASME/ISO/BSI standartlarına uygun çok çeşitli kaplama yöntemleri.

Somun (Hex Nuts);
›› M6- M100 arası ölçülerde DIN normunda üretim,
›› 1/4"-8" arası ölçülerde ASME standartında üretim,
›› A194 Gr.2H, A194 Gr.7,A194 Gr.8M, A194 Gr.B8A vb. standart kalitelerde üretim,
›› Titanyum, Duplex/Super Duplex, Inconel, Monel gibi özel alaşımlarda üretim,
›› Teknik resim veya müşteri taleplerine göre özel üretim,
›› Çinko, Sıcak Daldırma Galvaniz (HDG), Elektro Galvaniz (EG), Geomet, Teflon XYLAN/XYLAR gibi ASTM/ASME/ISO/BSI standartlarına uygun çok çeşitli kaplama yöntemleri.

Pul (Washers);
›› M6- M100 arası ölçülerde DIN normunda üretim,
›› 1/4"-8" arası ölçülerde ASME standartında üretim,
›› Paslanmaz olarak AISI 304- SS316- SS321 vb. çeşitli kalitelerde, karbon çelik veya talep edilen özel kalitelerde üretim,
›› Teknik resim veya müşteri taleplerine göre özel üretim,
›› Çinko, Sıcak Daldırma Galvaniz (HDG), Elektro Galvaniz (EG), Geomet, Teflon XYLAN/XYLAR gibi ASTM/ASME/ISO/BSI standartlarına uygun çok çeşitli kaplama yöntemleri.

PDF Katalog İndir
İZOLASYON KİTLERİ

Salmarcon İzolasyon Kitleri, elektrik izolasyon ve yalıtımı sağlamak ve flanşlı boru sistemlerinde sıklıkla görülen korozyonun etkileriyle mücadele etmek için tasarlanmıştır.
İzolasyon kitleri, metal-metal temasını ortadan kaldırarak, korozyonu önlemek ve boru sisteminin katodik korumasına yardımcı olmak için statik akımı durdurur. Kitler, katodik koruma sistemlerinin etkinliğini artırmak amacıyla petrol, gaz, su, rafineri ve kimya tesislerindeki borularda oluşabilecek elektrik akımlarını kontrol etmek için kullanılmaktadır.
Geçmiş tecrübeler, izolasyon kitleri ile yapılan katodik korumanın, en verimli ve ekonomik çözümü sağladığını göstermiştir.

PDF Katalog İndir

İzolasyon kitleri standart malzemeleri alt şekildedir ;
›› G10+PTFE İzolasyon Contası (Gasket)
›› Mylar veya G10 Boru (Sleeve)
›› G10 İzolasyon pulu (Washer)
›› Paslanmaz Çelik Pul (Washer)

İzolasyon Kitleri

İzolasyon kitleri, flanş sızdırmazlık yüzeyleri arasında bulunan fenolik veya neopren kaplı fenolik conta (TİP E ve TİP F), fenolik civata boruları (sleeve), maksimum koruma için civata başına iki izolasyon pulu ve yine civata başına iki adet çelik puldan oluşmaktadır.
İzolasyon kitleri esas olarak, farklı flanş malzemeleri arasında sızdırmazlığın gerekli olduğu boru hatlarında oluşabilecek korozyonun önlenmesi amacıyla kullanılır. Yalıtım setleri ilave olarak flanş bağlantılarını elektriksel olarak izole etmek için kullanılır ve boru hatları boyunca elektrostatik yük akışını önler.
SEVİYE GÖSTERGELERİ & ENSTRÜMANLAR

Klinger seviye göstergeleri ilk olarak Richard Klinger tarafından 110 yıldan uzun bir süre önce üretilmiş ve bugün hala endüstriyel ekipmanlardaki sıvı seviyesini güvenilir bir şekilde göstermeye hizmet etmektedir.

Verimli bir proses operasyonu, yüksek performanslı ölçüm cihazları gerektirir. Ürünlerimiz, alkali ve asit çözeltilerinin yanı sıra kazan suyuna karşı güç ve olağanüstü dayanıklılık sağlar. Ayrıca, sürekli kalite kontrolleri, sınıfının en iyisi ölçüm performansını, uzun vadeli kararlılığı ve bu ürün yelpazesini güvenilir kılan kaynak koruma özelliklerini kalıcı olarak sağlar.

Sıvı seviye göstergeleri gövde içinde bir refleks camına sahiptir. Seviye göstergesinde yer alan gözlem yuvası, sıvıların seviyelerinin net bir şekilde okunmasını sağlar. Tehlikeli veya toksik sıvılar ya da gazlar içeren uygulamalar söz konusu olduğunda, manyetik seviye göstergeleri ön plana çıkmaktadır.

›› Reflex Seviye Göstergesi
Sıvı seviyesi, pürüzsüz bir yüzeye ve prizmatik bir yüzeye sahip olan refleks camından görülür. Uygun yatırım & bakım maliyeti ve kolay seviye okuma gibi avantajlara sahiptir.

›› Transparent Seviye Göstergesi
Bu tür seviye göstergelerinde sıvı, her iki yüzeyi de pürüzsüz olan iki cam arasında bulunur. Sıvı seviyesi kolay bir şekilde camların içinden bakılarak gözlemlenir.

›› Bi-Colour Seviye Göstergesi
Şeffaf seviye göstergesinin bir çeşididir ve genellikle çok yüksek basınçlı su buharı seviyesini ölçmek için kullanılır. Çift aydınlatma sistemi elde etmek için gösterge gövdesinin arka tarafına buhar için kırmız, sıvı için yeşil renkli ışık monte edilir.

›› Magnetic Level Gauges
Seviye değişikliklerine anında ve hassas tepki vererek net değerler okumaya uygun, sıvı seviyesinin sürekli uzaktan kontrolünün sağlanabildiği ve 312 bar'a kadar yüksek basınç kapasitesine sahiptir.

›› Seviye Göstergeleri Yedek Parçaları
Reflex ve Transparent seviye göstergelerindeki lensler zamanla bulanıklaşır ve yedek parça olarak sipariş edilebilirler. Lensler ile birlikte contalar da değiştirilmelidir.

Tüm seviye göstergelerimize özel aksesuarlar sunuyoruz. Aksesuarlardan bazıları:
›› Led aydınlatıcı,
›› Donma önleyici blok,
›› Mika koruyuculu camlar,
›› eviye göstergesi gövdesi için ısıtma sistemi,
›› Dereceli ölçek.

PDF Katalog indir

SALMARCON CONTA KESME MAKİNASI

PORTATİF & DAİRESEL CONTA KESME EKİPMANLARI
Salmarcon Conta Kesme Makinesi ile her türlü acil durum veya günlük kullanımda ihtiyaç olabilecek ürünlerin kesimleri sağlanabilmektedir. 80 mm'den 1460 mm çapa kadar tüm ölçülerdeki dairesel contaları ihtiyaçlarınız doğrultusunda rahatlıkla kesebilirsiniz.

PDF Katalog İndir

PORTATİF CONTA KESME MAKİNESİ AVANTAJLARI
Özellikle sürekli üretim halindeki endüstriyel tesislerde, anlık ihtiyaç olabilecek sızdırmazlık ürünlerine anında ve hızlıca çözüm sağlamak oldukça önemlidir. Portatif conta kesme makinaları bu doğrultuda, tesis bünyesindeki atölyeler veya saha montaj faaliyetlerinde en hızlı çözümü sağlamak için geliştirilmiştir.

Ekipman ve tesisin sürekli çalışma prensibine uygunluk!
Portatif conta kesme makinalarında temel olarak Soft ürün kategorisinde yer alan fiber, teflon, grafit, mika ve kauçuk esaslı sızdırmazlık ürünlerini kesmek mümkündür.

Kullanım Şekli
80 mm'den 1460 mm çapa kadar tüm ölçülerdeki dairesel contaları ihtiyaçlarınız doğrultusunda kesme imkanı sağlayan portatif conta kesme makineleri üzerinde yer alan zımba ile kesim yapılacak plakaya bir merkezleme deliği açılmalıdır. Sonrasında büyük el çarkı manuel olarak çevrilerek dairesel kesici küçük plaka ile birlikte hareket ettirilmelidir. Kesilecek contanın her dönüşünde küçük el çarkı vasıtasıyla kesicinin aşama aşama girebileceği derinlik, ölçüye ve kesilecek plakanın sertliğine bağlı olarak değişmektedir. Kesilecek conta kalınlığının ideal ölçüsü 0,5 ile 3,0 mm arası kalınlıklardır.

Salmarcon Conta Kesme Makinası Teknik Detayları:

Uzunluk max.	mm	1100
Yükseklik max.	mm	250
Genişlik max.	mm	170
Ağırlık	kg	6.5
Dairesel kesim yapılabilecek min. çap	mm	~80
Dairesel kesim yapılabilecek max. çap	mm	1460
Circular feature width, dependent on type of workpiece	mm	up to 1
Circular feature width max.	mm	160
Slitting depth, dependent on type of workpiece	mm	up to 9

ÜRÜN ONAYLARI

Sızdırmazlık veya esneklik gibi olağan gerekliliklerin yanı sıra, çoğu durumda contaların daha özel spesifikasyonlara uyması gereklidir. Birçok endüstri sektörü, kullanılan contaların bu talepleri karşılamasını sağlamak için kendi özel onay programlarını oluşturmuştur. KLINGER ve SALMARCON contaları, bu tür sertifikasyon prosedürlerinin kapsadığı neredeyse tüm yaygın uygulamalar için geniş bir ürün onayı yelpazesi sunmaktadır.

›› İhtiyaçlarınıza uygun malzemeyi hızlıca bulmak için aşağıda yer alan kapsamlı sertifika tablomuza göz atın;

FİBER İÇERİKLİ CONTALAR

KLINGER Material	DVGW	Elastomer- Guideline	Elastomer- Guideline	W270	WRAS	VP401	OXYGEN*	TA-Luft (Clean air)	DNV GL	ÖVGW	Fire Safe	FDA	EU 1935 /2004
		Cold water	Hot water
KLINGERSIL® C-4240	x	x	x	x	x								on request
KLINGERSIL® C-4300	x	x		x					x				on request
KLINGERSIL® C-4324	x	x			x				x
KLINGERSIL® C-4400	x	x	x	x		x	x	x	x	x	x		on request
KLINGERSIL® C-4408									x
KLINGERSIL® C-4409								x	x
KLINGERSIL® C-4430	x	x	x	x	x	x	x	x	x		x		on request
KLINGERSIL® C-4430 plus	x	x		x	x		x	x			x		on request
KLINGERSIL® C-4500	x	x		x			x	x	x	x	x		on request
KLINGERSIL® C-4509									x
KLINGERSIL® C-8200								x	x
KLINGER® Quantum	x						x	x			x	x	on request
KLINGER® top-sil-ML1	x						x	x	x		x		on request
KLINGER® top-graph 2000	x						x	x	x
KLINGER® CompenSil	x					x		x	x				on request

TEFLON (PTFE) İÇERİKLİ CONTALAR

KLINGER Material	DVGW	KTW BWGL	KTW BWGL	W270	WRAS	OXYGEN*	TA-Luft (Clean air)	DNV GL	Fire Safe	FDA	EU 1935 /2004
		Cold water	Hot water
KLINGER® soft-chem										x	x
KLINGER® top-chem-2000	x	x	x	x	x	x	x	x	x	x	x
KLINGER® top-chem-2003	x	x		x		x	x	x		x	x
KLINGER® top-chem-2005	x	x			x	x	x	x		x	x
KLINGER® top-chem-2006	x					x	x	x		x
KLINGER® top-chem-2000 soft							x			x	x

GRAFİTLİ CONTALAR

KLINGER Material	DVGW	KTW BWGL	KTW BWGL	OXYGEN*	TA-Luft (Clean air)	DNV GL	Fire Safe
		Cold water	Hot water
KLINGER®Graphite Laminate SLF					x
KLINGER®Graphite Laminate SLS	x			x			x
KLINGER®Graphite Laminate SLS Multi Plus
KLINGER®Graphite Laminate PSM	x	x		x		x	x
KLINGER®Graphite Laminate PDM	x
KLINGER®Graphite Laminate TSM					x
KLINGER®Graphite Laminate XSM	x

MİKA ESASLI CONTALAR

KLINGER Material	DVGW	Elastomer- Guideline	Elastomer- Guideline	W270	WRAS	VP401	OXYGEN*	TA-Luft (Clean air)	DNV GL	ÖVGW	Fire Safe	FDA	EU 1935 /2004
		Cold water	Hot water
KLINGER® Miliam PSS									x

* *Yalnızca test raporu mevcuttur (Sertifika mevcut değildir )

SALMARCON SERTİFİKASYONLU CONTALAR

Material	TA LUFT	Fire Safe API 6FB	ASME B16.20 Performance Test	FDA

SALMARCON SPIRAL WOUND GASKET	x	x	x
SALMARCON CAMMPROFILE GASKET	x	x
SALMARCON SALGRAF SGS 3	x	x
SALMARCON SILICONE/VMQ				x
SALMARCON VITON/FKM				x
SALMARCON WHITE EPDM				x

* Yalnızca test raporu mevcuttur (Sertifika mevcut değildir )

SALMARCON ürün ve hizmetleri hakkında daha fazla bilgi için

TEKNİK DESTEK

Ürünlerimizin hangi şartlar altında ve nasıl kullanılacağı konusunda yardıma mı ihtiyacınız var? Müşterilerimize ileri uygulama mühendisliği ve ücretsiz eğitimler sunuyoruz! Daha fazla bilgi.

SERTİFİKASYONLU ÜRÜNLER

Kalitesini dünya çapında kanıtlamış ürün ve sertifikasyonlar ile, müşterilerimizin ve çevremizin güvende olmasını sağlıyoruz! Daha fazlası.

SALMARCON broşürünü indirin